Your browser does not support JavaScript![Error 1]
Skip to page content NASA NASA Skip to page content NASA HOME FOR RESEARCHERS FOR EDUCATORS FOR STUDENTS FOR EVERYONE
Skip to page content NASA Johnson Space Center, Houston, Texas                  

HARDWARE INFORMATION

Crew Transport Vehicle
Hardware Type
Workstations, Laboratory
Photo Gallery
Hardware Description
An important contribution to obtaining crew medical data in a timely manner was the addition of a Crew Transport Vehicle (CTV) at Kennedy Space Center (KSC) and Edwards Air Force Base (EAFB). Prior to the Extended Duration Orbiter Medical Project (EDOMP), medical data collection was initiated between 1.25 hours and 2.5 hours after wheels stopped at landing. This delay allowed a partial physiological recovery from spaceflight to occur and prevented investigators from obtaining information about the physiological condition of their subjects at landing.

The primary objective of the EDOMP was to ensure that the crew could safely land the Orbiter and perform an emergency egress after a 16-day mission. Some of the considerations that drove the decision about what type of vehicle to purchase and develop for immediate access were the following:

  1. potential medical emergency activities, which may have been more likely with a 16-day flight than with the typical 5- to 7-day flight;
  2. the number of people required in the CTV at landing;
  3. capabilities for interfacing with the Orbiter or white room;
  4. accommodations for interfacing with the Baseline Data Collection Facility (BDCF) at KSC, and the Postflight Science Support Facility (PSSF) at EAFB; and
  5. accommodations for physiological data collection.

Several variations of available vehicles were considered. These included the airport passenger transporter (APT) with 568 square feet, and the Aircraft Service Vehicle (ASV) with 360 square feet of available space. The ASV was determined to be insufficient, primarily because of its size. The APT was selected and modified to meet the unique requirements. Both CTVs (KSC and EAFB) were fully self-contained, single-operator, self-propelled units with internal environmental control systems. Each CTV could be raised by as much as 11 feet via a self-contained lift system to dock with the Orbiter hatch or the BDCF. A telescoping gangway was provided for docking ingress and egress, and a stairway in the rear of the vehicle provided an alternate exit. The passenger seats were removed and provisions for large recliner-type chairs, a refrigerator, restroom, emergency medical equipment and other improvements were added.

Although the two CTVs were originally different models of a Plane Mate APT, after modification they provided similar capabilities. The CTVs have been used since June 1991 (STS-40) and have proven to be very effective. Use of the CTVs contributed to enhanced emergency medical capability, improved crew comfort, enhanced medical data collection capability, and reduced time from wheels stop to data collection.

? NASA
Last Updated: 12/01/2014 - v10.0.55
Curators:  Abul A. Chowdhury
NASA Official:  Kenneth C. Jenks
Baselined: 7/15/2004
Skip to page content Budgets, Strategic Plans, and Accountability Reports ExpectMore.gov Information-Dissemination Policies and Inventories Skip to page content Freedom of Information Act President's Management Agenda Privacy Policy & Important Notices Inspector General Hotline Skip to page content Contact LSDA / Feedback Site Map Related Links Skip to page content Johnson Space Center USA.gov